How to Clean Silicone Molds with Vinegar and Baking Soda

While cleaning a silicone mold is very important, sometimes a mold is not a mold. A silicone mold that is not clean will not work correctly.  

Silicone Molds are used to create all sorts of things. They are used to create kitchenware, crafts, toys, and a lot more. Silicone molds can be a bit tricky to clean.

Sometimes the silicone is not compatible with the rest of the mold. The manufacturer may not have tested it with your rest of the mold.  

Sometimes the silicone is incompatible with the rest of the mold and the rest of the mold will not work correctly with the silicone.

This is called a non-compatible mold. If you do not want to pay for the expensive process of sending the mold to the manufacturer for a refund, then you can clean the mold yourself.  

This method is fairly simple and can be done by a novice.  

How to Clean Silicone Molds

You will need to know how to clean silicone mold to get it clean. You can use the silicone mold cleaning kit to clean the silicone mold. 

The silicone mold cleaning kit has a silicone cleaner, a vinegar, and a towel. You will use the silicone cleaner to clean the mold. 

Here’s how to clean silicone molds that you can learn.

Silicone Mold Cleaning:

Step 1: If you want to clean the mold without removing it from the silicone mold, you will need a cleaning kit. A silicone mold cleaning kit will have all of the materials that you need to clean the mold. A cleaning kit will also include a few small pieces of cotton, a rag, soap, and water.

Step 2: Put a small amount of soap on the rag and wipe the mold. This will remove the dirt and oil. You can use the rag to wipe down the entire mold if you like.

Step 3: Rinse the mold with clean water. You will notice that the soap will be left behind on the mold.

Step 4: Dry the mold.

Step 5: Clean the mold using a dry rag. The rag will be used to clean the mold.

Step 6: Clean the mold again. This will be the final cleaning. This is how to clean a silicone mold.  

Cleaning the mold using a silicone mold cleaning kit will make the cleaning process a lot easier.

You will have everything that you need to clean the mold. It is always a good idea to buy a silicone mold cleaning kit.

How to Clean Silicone Molds with Vinegar 

You also need to learn how to clean other silicone molds such as using vinegar.

Here are the steps:

1. Fill the mold with hot water and a splash of vinegar.

2. Let it sit for an hour or two.

3. Use a soft sponge or cloth to wipe the vinegar on the mold.

4. Use a toothbrush to scrub any stubborn areas.

5. Rinse the mold with warm soapy water and dry it with a clean towel.

6. Repeat these steps if necessary until the vinegar smell is gone, but do not use so much vinegar that it drips out of the mold.

How to Clean Silicone Molds with Baking Soda

The best way to clean a silicone mold with baking soda is to use it to mix with warm water.

Here is the recipe: 

1. Spray the mold with a mixture of baking soda and water to break down any stains or buildup.

2. Scrub with a brush to remove any stubborn stains or buildups.

3. Rinse thoroughly with water and dry the mold before storing.

4. To remove any lingering odors, soak the mold in a mixture of hydrogen peroxide and baking soda for 15 minutes. 

Tips for Using Silicone Molds in The Kitchen

Tips for using silicone molds in the kitchen is a little different than other kinds of molds.

Silicone is a flexible material and so it is easy to cut, pierce, and drill into.

Here is the tips: 

1. Make sure to use a pan that is larger than the mold you’re using.

2. Don’t fill the mold all the way to the top with liquid or else it will overflow.

3. If you’re using a liquid that can burn, like alcohol, make sure to use a low heat setting on your stovetop.

4. Make sure to use a spatula to remove your food from the mold, rather than trying to pull it out with your hands.

5. If you have leftover food that won’t fit in the mold, cut it up and store it in an airtight container for future use.

Do you have any tips for cleaning silicone molds? Please leave a comment below. If you liked this post, please share it with your friends. If you want to receive more tips like this, please subscribe to our newsletter.

Share your love:

Leave a Reply